117. 74.4 44.8 28.4 17.5 10.7 6.8 5.3 finished wire target value wire size (awg) 30 28 26 24 22 20 18 16 conductor stranding (number x awg) target value conductor diameter (in.) diameter (in.) upper spec limit .0221 .0251 .0291 .0341 .0401 .0481 .0573 .0646 .0235 .0265 .0305 .0355 .0415 .0495 .0590 .0665 .0249 .0279 .0319 .0369 .0429 .0509 .0607 .0684 7 x 38 7 x 36 19 x 38 19 x 36 19 x 34 19 x 32 19 x 30 19 x 29 lower spec limit target value part number 1/ construction details conductor - silver-coated high strength copper alloy jacket - radiation-crosslinked, modified etfe this specification sheet forms a part of the latest issue of raychem specification 55pc. date revision 55PC0114 title lower spec limit upper spec limit upper spec limit .64 .89 1.34 1.93 2.83 4.27 6.56 8.33 .60 .84 1.23 1.81 2.69 4.11 6.27 8.01 55PC0114-30-* 55PC0114-28-* 55PC0114-26-* 55PC0114-24-* 55PC0114-22-* 55PC0114-20-* 55PC0114-18-* 55PC0114-16-* page 1 of 1 09-18-03 wire, radiation-crosslinked, modified etfe-insulated, silver-coated high strength copper alloy, general purpose, hookup, 600 volt specification control drawing maximum resistance at 20c (ohms/1000 ft.) weight ( lbs/1000 ft.) wire ratings and additional requirements temperature rating: 200c maximum continuous conductor temperature voltage rating: 600 volts (rms) at sea level color: white preferred crosslinking proof test: 300 3c for 1 hour identification and color striping durability: 125 cycles (250 strokes) (minimum), 500 g weight insulation elongation and tensile strength: elongation, 50% (minimum) tensile strength, 5000 lbf/in2 (minimum) insulation flaws: spark test, 3.0 kv (rms) impulse dielectric test, 8.0 kv (peak) insulation thickness: .006 in. (nominal) shrinkage: 230 3c for 1 hour, 0.125 in. (maximum) in 12 in. voltage withstand test (post environmental): 2500 volts (rms) part number: the "*" in the part numbers above shall be replaced by color code designators. 1/ example:awg 22, white: 55PC0114-22-9 awg 22, white with black stripe: 55PC0114-22-90 .0120 .0150 .0191 .0241 .0301 .0385 .0476 .0538 .0110 .0140 .0175 .0225 .0285 .0365 .0452 .0514 d .0115 .0145 .0183 .0233 .0293 .0375 .0464 .0527 r wire & cable 501 oakside avenue redwood city, ca 94063-3800 phone: 1-800-227-8816 fax: 1-650-361-6297 this specification sheet takes precedence over documents referenced herein. reference documents shall be of the issue in effect on date of invitation for bid. dimensions are in inches and, unless otherwise designated, are nominal 1/ color code designators shall be in accordance with mil-std-681. other codes and suffixes may be added to the part number, a s necessary, to capture any additional requirements imposed by the purchase order. tyco electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any sp ecification, without notification to buyer. users should evaluate the suitability of this product for their application. specifications are subject to change without noti ce.
|
